[SOLVED] Intel Graphics 82945g Card

I need some help getting my video card to work with my monitors native resolution. I have a Dell 20 WS LCD that should operate at 1680 x 1050. I cannot seem to get better than 1280 x 1024.

Below is my xorg.conf file, I have tried removing all display options except for 1680 x 1050 but no luck.

Thanks for any help...BTW running Mepis 6.5 b7 with updates.

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
#Option "Xinerama" "true"
#Option "Clone" "true"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "SendCoreEvents"
#InputDevice "ALPS Touchpad" "SendCoreEvents"
#InputDevice "Appletouch" "SendCoreEvents"
#InputDevice "Stylus" "SendCoreEvents"
#InputDevice "Eraser" "SendCoreEvents"
#InputDevice "Cursor" "SendCoreEvents"
#InputDevice "Serial Mouse" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
# Xorg 7.0 font paths
FontPath "/usr/share/X11/fonts/misc:unscaled"
FontPath "/usr/share/X11/fonts/Type1"

# Legacy font paths
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"

# Other font paths
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"

EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "v4l"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection

Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Driver "synaptics"
Identifier "ALPS Touchpad"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "event"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Identifier "Appletouch"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "1120"
Option "TopEdge" "50"
Option "BottomEdge" "310"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapMove" "220"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "MinSpeed" "0.79"
Option "MaxSpeed" "0.88"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Relative"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection

Section "Monitor"
Identifier "Monitor0"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection

Section "Monitor"
Identifier "ATIMonitor"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection

Section "Device"
Identifier "Card0"
Driver "i810"
BoardName "unknown"

Screen 0
#Option "UseDisplayDevice" "dfp"
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Option "UseInternalAGPGART" "no"

# savage special options, use with care
#Option "NoUseBios"
#Option "BusType" "PCI"
Option "DmaMode" "None"

# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "AddARGBGLXVisuals" "true"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
EndSection

Section "Device"
Identifier "Card1"
Driver "i810"
BoardName "unknown"

Screen 1
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16

SubSection "Display"
Depth 8
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection

# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-82"
Option "SecondMonitorVertRefresh" "55-70"
#Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultColorDepth 16

SubSection "Display"
Depth 8
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
EndSection

Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultColorDepth 24

SubSection "Display"
Depth 24
Modes "1680x1050" "1440x900" "1280x1024" "1280x800" "1024x768" "800x600"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection