Mepis 3.4 and Monitor Resolution
Posts: 486
Hello,
I have Mepis3.4 and recently bought a Samsung SyncMaster940 19" Wide Panel LCD. The issue I am having is the resoltuion factor. By default the max I can get is 1024x768. The manu book states it works best at 1440x900. I have googled and googled and hacked and hacked my xorg.conf file and no luck. But a good thing is is that I backed up my original file and restore after each successfully failed hack attempt 
So here is my original xorg.conf file, can someone scan it over and may see something that I am missing?
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "CorePointer"
#InputDevice "Stylus" "CorePointer"
#InputDevice "Eraser" "CorePointer"
#InputDevice "Cursor" "CorePointer"
#InputDevice "Serial Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
# True type and type1 fonts
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/truetype/ttf-xfree86-nonfree"
FontPath "/usr/share/fonts/truetype/java"
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/type1/gsfonts"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/afms"
FontPath "/usr/share/fonts/bitmap"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/ttf"
FontPath "/usr/share/fonts/type1"
FontPath "/usr/X11R6/lib/X11/fonts/defoma"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "SyncMaster 930B"
#Option "DPMS" "true"
HorizSync 30-81
VertRefresh 56-75
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
ModeLine "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 +HSync +VSync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
Modeline "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync
EndSection
Section "Monitor"
Identifier "ATIMonitor"
VendorName "Samsung"
ModelName "SyncMaster 930B"
#Option "DPMS" "true"
HorizSync 30-81
VertRefresh 56-75
EndSection
Section "Device"
Identifier "Card0"
Driver "vesa"
BoardName "unknown"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
#Option "NoUseBios" # needed for some Savage cards
Option "UseInternalAGPGART" "no"
# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "IgnoreEdid" "true" # needs to be true for some nvidia cards
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-82"
Option "SecondMonitorVertRefresh" "50-70"
Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
What video card do you
Posts: 1027
What video card do you have?
If it is supported by another driver, it would be better to use that driver rather than "vesa"
See here http://www.mepis.org/docs/en/index.php/Monitor_resolution#If_you_forgot_to_set_the_resolution_or_you_changed_hardware
and also other places in the wiki.
Saist's guide http://www.mepisguides.com
Mike
Video Card driver........ I
Posts: 486
Video Card driver........
I posted last week on that and 3d and realized that my sis cannot do 3d, but I had changed my conf back to original bak when I broke it trying to fix resolution......
Saying that it is now working beautifully on 1440x900
Here is what I did...
-In xorg.conf I changed vesa to sis, how did I know I needed sis and not ATI or nvid something? See post http://www.mepis.org/node/13295
-Restarted X;ctr-alt-backspace
-In xorg.conf I changed
SubSection "Display"
Depth 16
Modes "1440x900" from 1024x768
-Restarted X;ctr-alt-backspace
There seems to be a lot of places you can change that at in conf file. I read <> the lines and realized the logic there. Above my modelines section, there is an Identifier named Monitor 0, so I went down to the Section screen and found one with monitor 0 listed as the monitor. There is also a default depth, mine was 16, so I went to the subsection with a depth of 16 and changed my resoultion.
As I am writing this it makes sense to me, but if something is not clear on how it is now working, please post
Travis
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Maybe one day I'll be able to help if I ask enough questions.
# Linux howto's for newbies from a newbie
Maybe an easier way would
Posts: 2299
Maybe an easier way would have been to boot the live CD, press F3 in the grub screen to select the right resolution, then boot until logon, and reinstall x configuration via the mepis x windows assistant.
Newbie or not Newbie, there's always a question
Not this one......
Posts: 690
Maybe an easier way would have been to boot the live CD, press F3 in the grub screen to select the right resolution, then boot until logon, and reinstall x configuration via the mepis x windows assistant.Newbie or not Newbie, there's always a question
Mepis 3.4 does not contain these (6.5) goodies....
Ko Bros
Maybe I need to update to
Posts: 486
Maybe I need to update to 6.5, can I do it w/o a complete re-install?
Travis
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Maybe one day I'll be able to help if I ask enough questions.
# Linux howto's for newbies from a newbie
Maybe........i haven't tried, but others have...
Posts: 690
Maybe I need to update to 6.5, can I do it w/o a complete re-install?Travis
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Maybe one day I'll be able to help if I ask enough questions.# Linux howto's for newbies from a newbie
Take a look at the step-by-step instructions from Saist:
http://www.mepislovers.org/forums/showthread.php?t=5967
Regards, Ko
Ko Bros
What Have You Tried?
Posts: 5513
Hi Travis
What types of changes have you tried to your xorg.conf file? Did you only change the monitor and not the video card?
One thing I would try as a stab in the dark would be
Also, what are the symptoms when you make a change? Does X fail and take you to a console login prompt? If so, have you tried doing "startx" and see what error messages pop up?
Jon
In /dev/null, no one can hear you type...