Nvidia panel
Posts: 3
Hello all
I just finished installing Mepis 6.5 and everything went fine. I have a question though.
Where i can find the Nvidia panel so i can change resolution, monitor etc?
Please keep in mind that all works well, even Beryl!
Thank you in advance
nvidia panel
Posts: 3
i did this and there is nothing there for nvidia also i can't get the right refresh rates for my monitor a 19' CRT Sony CPD E430
What about
Posts: 2
What about Kmenu->System->MEPIS->MEPIS X-Windows Assistant?
running nvidia driver?
Posts: 1109
i did this and there is nothing there for nvidia also i can't get the right refresh rates for my monitor a 19' CRT Sony CPD E430
Look at the MEPIS X-Windows Assistant mentioned in the last post.
But, be advised that if you're using the Nvidia drivers, the choices shown may be incorrect. For example, it may show 50hz when it's actually sending 60hz, 70hz, etc. It's a known bug with the drivers (shown refresh rate doesn't match actual refresh rate). If your monitor has a key on it that displays refresh rates, you may find that it's already correct.
Jim C.
NVIDIA X Server Settings
Posts: 20
I have a configuration utility in KMenu/System/NVIDIA X Server Settings
solved
Posts: 3
Hi all
thanks for your suggestion. I found the panel and now all is OK. As for the refresh rates i think there is a bug as although the panel reports 50hz i don't have any problem so it's ok (. but i have another minor problem. When i start for the first time the pc i always go to the command line if i reboot it boots to the X! Do you have any idea why thi is happening? BTW i had the same problem with Kubuntu
Thank you for your help
Right click on the Desktop
Posts: 1175
Right click on the Desktop and choose Configure Desktop and then display.
Wayne