I can't watch my TV

Hi,

I'm been Mepising for a few days now. Everything else is just fine, but I have one little problem. Hope someone can help me with that.

I can't get my TV-card working.

In Ubuntu I used 'Tvtime' and that worked perfectly. In Mepis I've tried Tvtime and few other TV-softwares, but no one works.

I suppose that I don't have the driver in my system that allows to use TV-card. I do not really understand Linux yet, so I don't know how to install drivers or at least how to check is there any -- nor do any needed setups. Luckely I have years experience with Windows and DOS, so I probally understand if someone try to help me

In console, one tv-soft will say that '/dev/video0' isn't there -- or something like that.

I've also tryed to read instructions from these sites, but can't understand because I'm so new with Linux:

http://www.hauppauge.com/html/linux.htm
http://www.linuxtv.org/wiki/index.php/Main_Page
http://www.hauppauge.com/pages/support/support_pci_878.html
http://ivtv.writeme.ch/tiki-view_faq.php?faqId=1

Synpatic package manager reports following error: http://apt.mepis.org/3.3.1/dists/unstable/main/binary-i386/Packages.gz: 404 Not Found
Does that maybe be linked to may problem? How can Mepis-repos be offline?

There's some information about my Mepis that I got from console:

Linux version 2.6.10 (root@mepis-msi) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Wed Feb 23 16:54:53 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
0MB HIGHMEM available.
479MB LOWMEM available.
On node 0 totalpages: 122864
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118768 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6470
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: root=/dev/hda1 nomce quiet splash=verbose vga=791
bootsplash: verbose mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013c6000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1317.461 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 482504k/491456k available (2660k kernel code, 8380k reserved, 864k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2605.05 BogoMIPS (lpj=1302528)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020
CPU: AMD Athlon(tm) XP 1500+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0820)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 90k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050125
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to
** so I can fix the driver.
audit: initializing netlink socket (disabled)
audit(1123429801.939:0): initialized
Total HugeTLB memory allocated, 0
SELinux: Registering netfilter hooks
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xde880000, using 3072k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:beb0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 46865 bytes, found (1024x768, 46140 bytes, v3).
Console: switching to colour frame buffer device 121x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE: IDE controller at PCI slot 0000:00:09.0
NFORCE: chipset revision 195
NFORCE: not 100% native mode: will probe irqs later
NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE: 0000:00:09.0 (rev c3) UDMA100 controller
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: MAXTOR 6L080J4, ATA DISK drive
hdb: MAXTOR 4K060H3, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3 hda4
hdb: max request size: 128KiB
hdb: 117266688 sectors (60040 MB) w/2000KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
3ware Storage Controller device driver for Linux v1.26.02.000.
3ware 9000 Storage Controller device driver for Linux v2.26.02.001.
libata version 1.10 loaded.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI wakeup devices:
HUB0 USB0 USB1 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 200k freed
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 5, pci mem 0xde183000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:03.0 to 64
ohci_hcd 0000:00:03.0: irq 11, pci mem 0xde181000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
inserting floppy driver for 2.6.10
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ibm_acpi: ec object not found
ACPI: Thermal Zone [THRM] (22 C)
powernow-k8: Processor cpuid 662 not supported
cpufreq: No nForce2 chipset.
Adding 658592k swap on /dev/hda9. Priority:1 extents:1
Adding 8024k swap on /dev/hda4. Priority:1 extents:1
EXT3 FS on hda1, internal journal
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
usbcore: registered new driver ndiswrapper
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01462:373c bound to 0000:00:04.0
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49978 usecs
intel8x0: clocking to 47504
VFS: Can't find ext3 filesystem on dev hda3.
VFS: Can't find an ext2 filesystem on dev hda3.
attempt to access beyond end of device
hda3: rw=0, want=66, limit=62
isofs_fill_super: bread failed, dev=hda3, iso_blknum=16, block=32
attempt to access beyond end of device
hda3: rw=0, want=130, limit=62
ReiserFS: hda3: warning: sh-2006: read_super_block: bread failed (dev hda3, block 64, size 1024)
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
FAT: invalid media value (0xca)
VFS: Can't find a valid FAT filesystem on dev hda3.
FAT: invalid media value (0xca)
VFS: Can't find a valid FAT filesystem on dev hda3.
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS-fs error (device hda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda3): ntfs_fill_super(): Not an NTFS volume.
VFS: Can't find a Minix or Minix V2 filesystem on device hda3.
VFS: Can't find a HFS filesystem on dev hda3.
HFS+-fs: unable to find HFS+ superblock
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0420c40(lo)
IPv6 over IPv4 tunneling driver
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3839 buckets, 30712 max) - 300 bytes per conntrack
VFS: Can't find ext3 filesystem on dev hda3.
VFS: Can't find an ext2 filesystem on dev hda3.
attempt to access beyond end of device
hda3: rw=0, want=66, limit=62
isofs_fill_super: bread failed, dev=hda3, iso_blknum=16, block=32
attempt to access beyond end of device
hda3: rw=0, want=130, limit=62
ReiserFS: hda3: warning: sh-2006: read_super_block: bread failed (dev hda3, block 64, size 1024)
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
FAT: invalid media value (0xca)
VFS: Can't find a valid FAT filesystem on dev hda3.
FAT: invalid media value (0xca)
VFS: Can't find a valid FAT filesystem on dev hda3.
NTFS-fs error (device hda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda3): ntfs_fill_super(): Not an NTFS volume.
VFS: Can't find a Minix or Minix V2 filesystem on device hda3.
VFS: Can't find a HFS filesystem on dev hda3.
HFS+-fs: unable to find HFS+ superblock
parport0: PC-style at 0x378 [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.6
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
eth0: no IPv6 routers present
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce chipset
agpgart: Maximum main memory to use for agp memory: 409M
agpgart: AGP aperture is 64M @ 0xd8000000
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39PST 2005
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=65.54.179.228 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=114 ID=48792 DF PROTO=TCP SPT=443 DPT=1032 SEQ=3490234126 ACK=2630911905 WINDOW=0 RES=0x00 RST URGP=0
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.18.226 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=12050 PROTO=TCP SPT=3969 DPT=139 SEQ=704668177 ACK=704668177 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.17.123 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=34872 PROTO=TCP SPT=3068 DPT=139 SEQ=15639898 ACK=15639898 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.15.155 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=32807 PROTO=TCP SPT=3235 DPT=139 SEQ=2835473971 ACK=2835473971 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.98.33.250 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=110 ID=55082 PROTO=TCP SPT=3272 DPT=445 SEQ=58586727 ACK=58586727 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.98.33.250 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=110 ID=55399 PROTO=TCP SPT=3272 DPT=445 SEQ=58586727 ACK=58586727 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.98.33.250 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=110 ID=55463 PROTO=TCP SPT=3272 DPT=445 SEQ=58586727 ACK=58586727 WINDOW=0 RES=0x00 RST URGP=0
spurious 8259A interrupt: IRQ7.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.15.155 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=51865 PROTO=TCP SPT=2812 DPT=139 SEQ=37650466 ACK=37650466 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=65.54.239.210 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=114 ID=9868 PROTO=TCP SPT=1863 DPT=1040 SEQ=1026377913 ACK=531344073 WINDOW=0 RES=0x00 ACK RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=65.54.239.210 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=242 ID=16736 DF PROTO=TCP SPT=1863 DPT=1040 SEQ=1026377912 ACK=531344074 WINDOW=0 RES=0x00 ACK RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=65.54.239.210 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=242 ID=16737 DF PROTO=TCP SPT=1863 DPT=1040 SEQ=1026377913 ACK=531344074 WINDOW=0 RES=0x00 ACK RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=65.54.179.228 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=114 ID=11009 DF PROTO=TCP SPT=443 DPT=1043 SEQ=1718531581 ACK=2210753186 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.15.155 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=26705 PROTO=TCP SPT=4601 DPT=139 SEQ=1583119651 ACK=1583119651 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.15.155 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=27124 PROTO=TCP SPT=3472 DPT=139 SEQ=1620994730 ACK=1620994730 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e005 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x85 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e005 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.214.237 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=123 ID=17841 PROTO=TCP SPT=4488DPT=139 SEQ=3885009962 ACK=3885009962 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
Linux video capture interface: v1.00
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.17.123 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=33049 PROTO=TCP SPT=1671 DPT=139 SEQ=3296042966 ACK=3296042966 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=69.18.159.205 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x20 TTL=114 ID=44363 PROTO=TCP SPT=80 DPT=1055 SEQ=1277922404 ACK=1277922404 WINDOW=0 RES=0x00 RST URGP=0
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.17.123 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=58495 PROTO=TCP SPT=2312 DPT=139 SEQ=3234297556 ACK=3234297556 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.96.119 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=122 ID=54353 PROTO=TCP SPT=4433 DPT=139 SEQ=2713042782 ACK=2713042782 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.96.119 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=122 ID=4537 PROTO=TCP SPT=1463 DPT=139 SEQ=2234573437 ACK=2234573437 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
ABORTED IN=eth0 OUT= MAC=00:10:dc:53:e0:0f:00:11:bb:47:11:18:08:00 SRC=84.248.178.65 DST=84.248.17.230 LEN=40 TOS=0x00 PREC=0x00 TTL=122 ID=25963 PROTO=TCP SPT=4640 DPT=139 SEQ=4011693144 ACK=4011693144 WINDOW=0 RES=0x00 RST URGP=0
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 ' to make it known.
root@1[~]#

My TV-card is analog Hauppauge.

What settings or drivers do I need? Can someone help me?

Sorry my poor english. I hope you can still read it.